Do you need a magnet package that's easy to install and service?

SIEB's MagBox is the answer! Why?

Everything you need is in the box!

Here's what you need to get up and running:

• Mount the box onto your machine (underbody or elsewhere)
• Run hydraulic lines, pressure (P) and return (T) to the bulkhead panel
• Install the lift/drop joystick and run the control cable to the bulkhead receptacle
• Provide 12/24 Volt DC switched battery voltage to the bulkhead receptacle
• Run the magnet cable through the bulkhead cord grip to the safety disconnect

• INFLOW
  • 14 US GPM @ 1600 psi (Dedicated Pump)
  • 3/4" (I.D.) Min. - High Pressure Hose
• OUTFLOW
  • 3/4" (I.D.) Min. - High Pressure Hose
• FLUID TEMPERATURE
  • 125ºF Optimum, 140ºF Maximum
• SOLENOID COIL
  • 12/24 VDC (As Required)